New diesel-powered advantages

The bigger, stronger, faster Brokk 400D is yet another impressive step forward for diesel-driven demolition machines – perfect for heavy-duty demolition in places that lack power supply. It outperforms conventional excavators several times heavier with both its breaking power and the ability to get into tight spaces.

The 400D is the fastest Brokk ever, more than 60% faster than other Brokk machines, making it quick and easy to move between work stations or travel longer distances. And the speedier movements increases productivity once at the work site. The Brokk 400D features a new, powerful diesel engine, as well as a new undercarriage design that provides an even greater machine stability. To top it all off, the Brokk 400D has longer reach, carries heavier tools and delivers a mighty punch with the bigger hammer.

The Brokk 400D is remote-controlled, providing a safe, ergonomic work environment. For work in extreme environments, it can be ordered with heat resistant hoses, extra cylinder protection, air-cooling system etc.

TECHNICAL DATA

Weight	5500 kg (12125 lbs)
Width min	1600 mm (63 in)
Height min	1860 mm (73.2 in)
Motor output	70.6 kW
Recommended max weight attachment	600 kg (1323 lbs)
Sound power level Lwa	100 db(A)
Transport speed, max.	3.4 km/h (0.9 m/s, 2.1mph)
System pressure incr. to attachment max.	22.0 MPa (3191psi)
Hydraulic system capacity	130 litres (34.3 US gal)
Pump flow max. at 50Hz	130 l/min (34.3US gal/min)
Pump flow max. at 60Hz	130 l/min (34.3US gal/min)

ATTACHMENTS FOR THE BROKK 400D

CC700	Rock Breaker SB 552	Bucket 250l	Beam Grapple

40% more power than its predecessor, the Brokk 400

And it provides the ability to size up the attachments, such as the powerful SB 702 breaker. With the new reinforced design and additional work reach over the Brokk 400, while keeping about the same size and weight, it sets a new benchmark in power-to-size ratio in its segment. The Brokk 500 is also equipped with Brokk SmartPowerTM – an intelligent and hardened electrical system that dynamically adjusts the power output for maximum performance and industry leading availability over the lifetime of the machine. To top it off, the machine also introduces a number of smart service improvements that will simplify the daily maintenance. In short – stronger, smarter and tougher!

• 40% more demolition power with the SB702 breaker
• Increased work reach and radius
• Brokk SmartPowerTM – an intelligent and hardened electrical system
• Industry-leading serviceability
• Compatible with all Brokk 400 attachments

TECHNICAL DATA

Weight	5200 kg (11464 lbs)
Width min	1600 mm (63.0 in)
Height min	2072 mm (81.6 in)
Motor output	30 kW
Recommended max weight attachment	700 kg (1543 lbs)
Sound power level Lwa	100 db(A)
Transport speed, max.	2.5 km/h (0.7 m/s, 1.6 mph)
System pressure incr. to attachment max.	24 MPa (3481 psi)
Hydraulic system capacity	130 litres (34.3 US gal)
Pump flow max. at 50Hz	115 l/min (30.4 US gal/min)
Pump flow max. at 60Hz	130 l/min (34.3 US gal/min)

ATTACHMENTS FOR THE BROKK 500

CC700	Rock Breaker SB 702	Hydraulic Drill	Bucket 250l

Heavy duty demolition power

The Brokk 400 is the largest machine in the Brokk range and the most powerful demolition robot available on the market today.

As with all Brokk machines, the capacity in relation to size and weight is unsurpassed. The Brokk 400 weighs 5100kg without attachment and can handle tools of up to 600 kilo weight. Compare these figures with the weight of a conventional excavator equipped with the same type of breaker!

The difference is that a Brokk machine is designed and built specifically for demolition purposes, thus optimised for this particular kind of job. And it does it better than any other equipment available.

TECHNICAL DATA

Weight	5100 kg (11244 lbs)
Width min	1600 mm (63.0 in)
Height min	1722 mm (67.8 in)
Motor output	30 kW
Recommended max weight attachment	600 kg (1323 lbs)
Sound power level Lwa	100 db(A)
Transport speed, max.	2.5 km/h (0.7 m/s, 1.6 mph)
System pressure incr. to attachment max.	22 MPa (2538 psi)
Hydraulic system capacity	160 litres (42.3 US gal)
Pump flow max. at 50Hz	115 l/min (30.4 US gal/min)
Pump flow max. at 60Hz	130 l/min (34.3 US gal/min)

ATTACHMENTS FOR THE BROKK 400

CC700	Rock Breaker SB 522	Hydraulic Drill	Bucket 250l

A new dimension in tunnelling demolition.

With the 800S model, Brokk is breaking way for a whole new field of application when it comes to tunnelling projects.

Considerably larger than the other machines in the Brokk family, it has an unparalleled capacity that makes it perfect for really heavy and demanding demolition work. The Brokk 800 weighs 11 050 kg without attachment, and has a total reach of a whopping 9,4 meters. The power is equally impressing. Equipped with the MB 1000 breaker, the Brokk 800 offers almost twice the hitting power of the Brokk 400.

Of course, this ”monster” gives the operator the same secure work environment as the smaller Brokk machines. On a safe distance from vibrations and falling debris – in perfect control.

TECHNICAL DATA

Weight	11050 kg (24361 lbs)
Width min	2.2 m (7.2 ft)
Height min	2.65 m (8.7ft)
Motor output	45 kW
Recommended max weight attachment	1200 kg (2646 lbs)
Transport speed, max.	2.1 km/h (0.6 m/s, 1.3 mph)
System pressure incr. to attachment max.	25 MPa (3626 psi)
Hydraulic system capacity	165 litres (43.6 US gal)
Pump flow max. at 50Hz	140 l/min (37 US gal/min)
Pump flow max. at 60Hz	168 l/min (44.4 US gal/min)

ATTACHMENTS FOR THE BROKK 800S

MB 1000	Beam Grapple	Shot Crete